I am running a trial version of Ghost solution suite (Version 11.5.1.2266) I am trying to send an image to some PC's on our test net, which has an existing PXE server. Everything starts fine but before we get to 10% the client says it needs to open the second spanned image and I have to cancel the image. The recieving disk is 100 gig, the image file is our current win7 image imported from another server (Still runs fine there). The log files look like this:
R: ACK TOK SEQ=967 ACK=2148644735 WIN=57240 LEN=14 ADDR=130.85.82.123:7777
Congestion window 4897
RTT for 2148644725 is 8 ticks
Retransmit timeout 32 = 9 + 4 * 4
Recv would block
S: ACK SEQ=2148644735 ACK=981 WIN=57240 LEN=10 ADDR=[ALL]
Timing of 2148644735 commenced
Wait(32) returned (R) after 16 ticks
525285359 R: ACK TOK SEQ=981 ACK=2148644745 WIN=57240 LEN=10 ADDR=130.85.82.123:7777
Congestion window 4907
RTT for 2148644735 is 24 ticks
Retransmit timeout 40 = 11 + 4 * 7
Recv would block
Wait(200) timed out after 203 ticks
525285562 Acknowledgement timeout
S: ACK SEQ=2148644745 ACK=991 WIN=57240 LEN=0 ADDR=[ALL]
Wait(1000) timed out after 1000 ticks
525286562 Wait(1000) timed out after 1000 ticks
525287562 Wait(1000) timed out after 1000 ticks
525288562 Wait(1000) timed out after 1000 ticks
525289562 Wait(1000) timed out after 1000 ticks
525290562 Wait(1000) timed out after 1000 ticks
525291562 Wait(1000) timed out after 1000 ticks
This goes on for a while, then:
525731656 Wait(1000) timed out after 1000 ticks
525732656 RML_recv failed: No Error
S: RST SEQ=2148644745 ACK=991 WIN=0 LEN=0 ADDR=130.85.82.123:7777
ConnectionState was 4, now 12
State was 4, now 12
RML Statistics
Retransmits on Request: 1
Retransmits on Timeout: 215
Zero Window Probes: 13
End RML Statistics
Shutting down RML
525732859 RML shutdown
I think the last part is me going and canceling the image at the client.
I don't know where to check if spanning is enabled, but it shouldn't need to be.
Any help would be appreciated.
Brian